The 3M Marson Platinum Plus Premium Gold Lightweight Filler is a stain-free, tack-free, super premium lightweight filler. This product has a smooth, creamy texture that provides perfect adhesion to steel, aluminum, fiberglass, cured Epoxy, primers, E-Coat, and SMC. You can use this product under a base coat or the clear coat systems. With its unique creamy and smooth texture, it is extremely easy for you to apply this filler on surfaces. The 3M Marson body filler contains the special adhesion promoter Z-216, which makes it unnecessary to sand down to bare metal, unlike other fillers.
The one gallon can of 3M platinum plus filler includes a crème hardener. You can now repair surface imperfections on your auto body, industrial or architectural surfaces with ease and perfection. It requires only a 20 minute cure time to help you sand sooner. This product is vacuum processed to make it pin hole free. The silky texture makes it easier for you to sand.
How to prepare the surface before using this product - You may have to clean the repair area using water and soap, followed by a wax and grease remover
- Sand the surface as necessary before the application of the product.
How to use the 3M Marson Platinum Plus Premium Gold Lightweight Filler-01131 - Mix the body filler and cream hardener thoroughly, to a uniform color
- Gel time/setting time is approximately 3-5 minutes @ 75°F (24°) using 2% hardener as prescribed
- Spread the filler on the mixing board, ensuring that there are no air bubbles during mixing
Key Features of the 3M Marson Platinum Plus Premium Gold Lightweight Filler: - Stain-free, stack free and pinhole free
- Best adhesion to aluminum, steel, and many more substrates
- Use below a base coat/clear coat
- No need to sand down to bare metal because of special adhesion promoter
- Smooth creamy texture
WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warning.ca.gov.
